- 品牌/型號：運通
- 加工定制：是
- 類型：開放式
- 樣式：立式
- 品牌：運通
- 型號：FCC
- 別名：廢輪胎自動化回收環保設備
- 用途：廢輪胎自動化回收
廢舊輪胎常溫制取精細膠粉成套生產線工藝流程圖
The production process for waste tire recycling machinery
1.廢舊輪胎—2.鋼圈裁斷機---3.拉絲機----4.輪胎破碎機---5.小破碎機---6.橡膠中碎機—7.磁選機—8.直線振動篩---9.橡膠細碎機
1.Waste Tires-2.Tire cutter---3.Wire bead extractor—4. Tire Crusher---5.Secondary Crusher---6.Secondary rubber shredder—7.Magnetic separator-8.Square magnetic separator---9.Third rubber shredder
10.磁選機-----11.直線振動篩------12.氣流分選機----13. 儲料箱------14. 橡膠研磨機 -- ------15. 氣流分選機--16三次元振動篩---17.膠粉定量包裝機
10.Magnetic separator---11.Square magnetic separator—12. Airflow classifier-—13. Storage Bin --14. Rubber grinder -15.Airflow classifier
. -16.Three-layerviratory screen—17.Auto bag filler
◆可在常溫下將廢舊輪胎，尤其是把全鋼絲子午線輪胎粉碎成40-120目的精細膠粉，并把輪胎中的鋼絲和尼龍纖維全部自動分離并回收再利用。
◆生產線結構相當緊湊，設備占地面積小，生產工藝流程簡單。
◆設備耗能低，投資性價比較高。
◆自動化程度相當高，生產線操作人員少。
2、4 FEATURES:
◆ To granulate radial tires into fine rubber crumb of 40~120 mesh with steel and fiber completely recycled at ambient temperature.
◆ Tight construction, small space and simple technique flow.
◆ Low energy-consuming and good performance-cost ratio
◆ Hight automatization, fewer labours requirement.
3.成套生產線
◆結構緊湊，布局合理，占地面積小，萬噸生產線占地面積僅需600 M2，大大降低企業投資成本及營業成本。
◆裝機功率業界最低，萬噸生產線總裝機功率僅811KW，大大降低設備營運電力成本，單位產品成本更低，增強橡膠粉產品競爭力。
◆根據客戶不同需要生產線可配置成手動控制和自動控制兩種類型。
◆整胎進料，鋼絲分離更撤底，纖維分離效果更好，橡膠粉纖維含量小于1%，提升橡膠粉質量，增強橡膠粉產品市場競爭力。
◆生產線最終出料可做成5-15目，15-30目顆粒，40-100目膠粉等規格，滿足不同客戶的需求。
◆中細碎機結構設計獨特，刀具使用壽命長，大大提高設備工作效率，降低設備維護成本。
◆生產線配有除煙除塵設備，在運行過程中無污染，無粉塵，無纖維擴散在車間，符合當前環保經濟，循環經濟主旋律，更契合政府環保形象宣傳需要。
◆生產線配有詳細設備使用維護說明，便于操作人員操作。
◆生產線人員配置情況：3000噸自動化生產線5-7人，5000噸自動化生產線6-8人，10000噸自動化生產線8-10人（人員可根據生產線實際情況增減）
◆生產線配置合理，操作程序簡單，連接順暢，大大降低設備故障概率
3、Features of machinery:
◆ Tight construction, fine layout, small space, 600sqm only for FCC 10,000, lower investment and operating cost.
◆ Low energy consuming, 811kW/hour only for 10,000 which is the lowest power cost in this industry.
◆Two types of handle control and automatic control by different customer
◆ The whole input tires, after the processing, steel are completely separated and fiber can be separated up to 99% or above. The finish product is high and competitive in the market
◆.The finished line output size can be made into 5-15 mesh ,15-30 mesh grains, 40-100 mesh powder and other specifications
◆ Unique design, high output and long lifetime blade characterize secondary shredder and fine rubber shredder, which can improve the working efficiency and lower equipment maintenance cost.
◆In line have dust remover ,equipment running pollution-free, no fine dust, no fiber fly in the shop, meeting the environmental requirement of the government.
◆Have operation instruction , simple operation.
◆5-7people required for FCC3000 with automatic control system, 6-8people required for FCC5000 with automatic control system,
8-10people required for FCC10000 with automatic control system(May be based on truth add/reduce people)
◆ Reasonable construction, easy operation and low rate of breakdown.
